Modernization and development of electric drives and CNC control systems for metal-cutting and other machine tools (with the involvement of LLC RPE ENERGO-PLUS specialists):
- adjustable thyristor electric drive for an oil churning unit;
- control system for a rings production machine for sleeve filters;
- control system for interconnected electrical drives of a winding machine for the fiberglass pipes production;
- modernization of electrical equipment of horizontal boring machine 2A535;
- modernization of electrical equipment of the lathe 16K20T1;
- modernization of electrical equipment of horizontal boring machine 2D450;
- repair and commissioning of the main movement electric drive type BTU 3501-R of the heavy lathe 1A660;
- manufacturing, installation and commissioning of the electronic control system for the universal welding rotator M11050A;
- development and manufacture of an electromechanical control system for the state of in-line winding of welding wire on cassettes;
- modernization of the feed electric drive of the horizontal boring machine type 2A614-1.
CLIENT
Ukrainian-Bulgarian enterprise NAK, Podorozhne village,
Bag Filter Plant, Kremenchuk,
UkrIzolit, Svitlovodsk,
PJSC "KREDMASH",
PJSC "Kremenchuk Steel Works",
PJSC Kremenchuk Career Management "Kvarz",
OBOD CJSC,
SE "ITSTS "SVITKERMET""
YEARS OF IMPLEMENTATION
2013—2018
TYPE OF WORKS
Design, supply of equipment, installation, commissioning
Equipment used, specifics of works provided
Modernization of processing machines using the following equipment and software:
- SI8 pulse counters;
- Lenze 8200 Vector frequency converter;
- PLC Vipa 100;
- operator panel OP7;
- Lenze 473 DC converter;
- Santerno DCREG2 DC drive (Italy);
- ETI relay and contactor equipment;
- ETU-3601 DC drive;
- NC-201M Balt-System CNC;
- ELL DC drive (Bulgaria);
- LIR-581 SPPU;
- Toshiba VFPS1;
- VF-S15 DC drives;
- Autonics encoders;
- Precizika Metrology linear converters;
- Autonics digital tachometer;
- FC OVEN;
- DC electronics BTU 3501-R;
- INVT GD100 frequency converters;
- Kinco PLC;
- Servo drives Lexium 32 (Schneider Electric);
- SoMove software.
Design
Installation works
Equipment supply
Commissioning works
Similar projects
Adjustable micropower drive for coal hoisting machine MPB 5x2x2
Adjustment of project documentation “DZF. Automatic pump control system 8NDV”
Automation of drying at 1, 3, 4 process lines at Centralized processing plant
Automation of the combustion safety system at the Centralized Processing Plant furnace unit No. 5 of...
CHP plant reconstruction with the conversion of boiler units No. 6, No. 7, No. 8 to burn non-designe...
Commissioning of five distribution devices for connecting frequency converters, including parameteri...
Construction of a water treatment plant at PJSC “POEZ-KERNEL GROUP” for the project impl...
Design and commisioning of the control and safety system for the GM-3 hydraulic unit
Emergencies early detection and people notification, in case of emergencies occurrence, system at th...
Implementation of the Coastal Pumping Station (CPS) NDV adjustable electric drive system at the CHP ...
Installation and commissioning of a set of equipment for water purification by reverse osmosis techn...
Modernization of the automatic water level in boiler drums No. 1-4 regulation and control system
Modernization of the DZF unified control room
Modernization of the sewage pumping stations SPS-4 and SPS-7
Monitoring of the current load of the mill ball drive electric drives at mill No. 21115, inv. No. 12...
Oxygen and natural gas metering at the BRM based on Ergomera equipment
Reconstruction (technical upgrading) of the control and management system for the turbo-generator
Reconstruction and automation of section No. 12, DSP
Reconstruction of the 16 ATA steam supply scheme
Reconstruction of the CHP plant with the conversion of boiler unit No. 9 to burn non-project fuel (g...
Setting up control systems and a dispatching system for autonomous boiler houses (11 units) in Chern...
Setting-up an automatic frequency control station for electric motors of network pumps with the inst...
Technical re-equipment of the automated control system for pumping units (ACS PU)
Technical re-equipment of the automatic control system (ACS) for the superheated steam temperature c...
Technical re-equipment of the raw water supply scheme for the ultrafiltration unit (UFU) at the CHP ...
Technical re-equipment of the wastewater treatment unit by applying the complex technology of membra...
Got questions?
Want to know more about our products or services? Please, fill in the form, and our Customer Relations Manager will contact you as soon as possible!
Message us 
